10L Volume Gas Water Heater Fast Heating Capability Durable Construction Suitable Various Models Residential Commercial

10L Volume Gas Water Heater Fast Heating Capability Durable Construction Suitable Various Models Residential Commercial

Product Description

A water heater's real character shows when two taps open at once. Cheaper units respond by splitting flow and collapsing temperature at both outlets, forcing household members into an unspoken negotiation about who gets hot water and when. Our 10L Instant Constant Temperature Gas Water Heater handles concurrent demand differently, because its 21kW burner and proportional gas valve modulate against total flow rather than a fixed setpoint. When a kitchen tap opens while a shower runs, the control system detects the increased throughput and raises combustion proportionally, holding both outlets inside the ±0.5°C tolerance band. The oxygen-free copper heat exchanger's high conductivity is what makes this responsiveness physically possible — heat transfers into the water stream fast enough to keep pace with demand changes measured in fractions of a second.

Specifications

Rated hot water production stands at 11 litres per minute at a 25-degree Celsius temperature rise, or 2.64 gallons per minute, which is the technical basis for dual-outlet capability in temperate inlet conditions. The unit measures 530 by 330 by 143 millimetres in a plate iron shell with IPX2 protection. Efficiency exceeds 93 percent, and natural gas at 2000 pascals feeds a G1/2 inch inlet at 2.06 cubic metres per hour under full load. The 0.02 to 0.8 pascal pressure window accommodates the pressure fluctuations that accompany simultaneous draws, and temperature adjustment spans 35 to 80 degrees Celsius on the touch panel. Electronic ignition, 220V operation, and forced exhaust venting through 50, 60, or 90 millimetre flues complete the configuration.

Technical Parameters

Installation Scenarios & Installation Precautions

Homes where a bathroom and kitchen sit within reasonable pipe distance of one another gain the most from dual-outlet capacity, making open kitchens with adjacent shower rooms, compact vacation villas, and small serviced apartments natural fits. Central placement minimises pipe runs to both outlets, reducing the dead-leg volume that must be flushed before hot water arrives. Confirm that the wall can bear the operating load, allow 200 millimetres above the unit and 150 millimetres to each side for service access, and keep the flue terminal a minimum of 600 millimetres from windows, doors, and air intakes. Gas piping must be sized for the full 21kW input rather than an assumed partial load. Sealed bathrooms, bedrooms, stairwells, and any space without independent combustion-air supply are excluded from consideration.

Features & Value Delivered to Global Buyers

Feature highlights include constant temperature regulation to ±0.5°C under variable flow, flame failure protection, overheat cutoff at 176 degrees Fahrenheit, electronic ignition, and LED touch-panel control. Three engineering decisions define its edge over competitors: proportional rather than on-off gas modulation, an oxygen-free copper exchanger with the thermal response needed for rapid load changes, and factory-verified efficiency above 93 percent. Container loading of 780 pieces per 40HQ keeps landed costs disciplined for volume buyers. Customisation covers silk-screen logo work, full colour range, flue sizing, LED display choices, and optional protection modules, while every shipment carries a one-year warranty, one percent complimentary spare parts, and technical documentation.

Safety Boundaries & Long-Term Use Reminders

Dual-outlet operation has physical limits: this unit is not suitable for three or more simultaneous high-flow draws, not designed for continuous industrial-scale demand, and not intended for installations at elevations above 2000 metres without altitude compensation. In daily use, keep the flue outlet clear, maintain a 300-millimetre clearance for combustible materials, and shut the gas supply immediately if ignition behaves abnormally. For sustained performance, test the flame failure protection annually, clean the inlet filter every three to six months where sediment is present, and pay attention to whether dual-outlet temperature stability degrades over time — this is usually the earliest observable symptom of heat exchanger scaling and should prompt professional inspection.